Hydraulic Disc Hubs / Rotors

Image_203Disc hubs or rotors are available in untreated plain finish (”as cast”).
Some disc hubs are also available in hot dip galvanised or zinc plated finish. With the hot dip galvanised and zinc plated finish, wheel bearings and zinc plated wheel studs are fitted and all appropriate surfaces are coated. Disc hubs are cast to include the hub, which houses the wheel bearings, whilst rotors are fitted to a separate hub.
AL-KO can provide disc hubs and rotors drilled to suit the majority of popular wheel drilling patterns ex stock and can manufacture to suit most other drilling patterns on request, depending on compatibility. The table below lists popular disc hubs and rotors.
Disc hubs are available in many formats, including undrilled, drilled, studded (with studs & nuts) and with full bearing kits. It is important to select the appropriate brake capacity and to seek advice from AL-KO on the suitable axle machining profile and bearing configuration to carry and stop the required load given the wheel size that is to be fitted.
Note: the braking capacity should be matched to the planned maximum trailer mass.

PART NO OF DISC HUB FITTED WITH STUDS ONLY

FINISH

TYPE

BEARINGS CAN BE FITTED TO DISC HUBS SUIT THESE MACHINING PROFILES

POPULAR WHEEL DRILLING PATTERNS

432207

Plain Non- Galvanised

Disc hub

LM / slimline

Ford 5 x 4.5” PCD

432290

Hot dipped

Galvanised

Disc hub Marine Suit 13” & 14” Wheels

supplied with slimline cups

& cones

Ford5 x 4.5” PCD

432295

Hot dipped

Galvanised

Disc hub Marine Suit 13” & 14” Wheels

supplied with LM cups &

cones

Ford 5 x 4.5” PCD

432210

Plain Non- Galvanised

Disc hub Suit 13” & 14” Wheels

LM / slimline

Commodore 5 x 120mm PCD

432208

Plain Non- Galvanised

Disc hub Suit 13” & 14” Wheels

LM / slimline

HQ Holden 5 x 4.75” PCD

432200

Plain Non- Galvanised

Disc hub Suit 13” & 14” Wheels

LM / slimline

HT Holden 5 x 4.25” PCD

432280

Hot dipped

Galvanised

Disc hub Marine Suit 13” & 14” Wheels

Supplied with slimline cups

& cones

HT Holden 5 x 4.25” PCD

432285

Hot dipped

Galvanised

Disc hub Marine Suit 13” & 14” Wheels

Supplied with LM cups &

cones

HT Holden 5 x 4.25” PCD

431200

Plain Non- Galvanised

Disc hub Suit 600×9 Wheels

LM

600 x 9” 5 x 4.25” PCD

432145

Zinc Plated

Disc hub Suit 16” Wheels

slimline

6 stud Land Cruiser 6 x

139.7mm (6 x 5.5”)

442462

Plain Non- Galvanised

Hub parallel + Rotor Suit 16” Wheels

Parallel

6 stud Land Cruiser. Studs only

6 x 139.7mm (6 x 5.5”)

432105

Plain Non- Galvanised

Disc rotor only

To suit 1.5 & 2 T hub

6 stud Land Cruiser 6 x

139.7mm (6 x 5.5”)

432127

Zinc Plated

Disc hub Suit 16” Wheels

2T

6 stud Land Cruiser 6 x

139.7mm (6 x 5.5”)

Sign up to our newsletter to receive hints, tips and vip only special offers.