Corner Steadies and Big Foot™
Corner Steadies
AL-KO International manufactures a range of corner steadies that set the standards for this type of product. Made from quality materials these well designed corner steadies ensure that the end user is able to stabilize the caravan or trailer with the minimum of effort.
Note: Corner steadies are not designed to be used as a jack or as the means of lifting the trailer or caravan off the ground. They are designed to stabilize the trailer or caravan when stationary.
AL-KO was the first company to introduce the hexagon drive on the screw shaft of the corner steady, providing positive drive. Some innovative customers use a hexagon socket and an electric screw driver to quickly and effortlessly raise and lower the steady.
The unique AL-KO plastic end knob and plastic grip make the use of the winding handle simple and comfortable.
All AL-KO corner steadies have been tested and meet the requirements of the Recreational Vehicle Manufacturers Association of Australia, the Australian controlling body for caravan manufacturing standards.
Steadies are available in conventional wind down style and also in “drop down” style, where the steady can be swung from the horizontal travelling position to different angles including the optimum position of vertical. The “drop down” corner steady requires only a small amount of winding to steady the caravan. The top of the range corner steady is the German designed 1000 kg heavy duty steady which is the ultimate in strength and style.
Most AL-KO corner steadies are suitable to be fitted with the AL-KO Big Foot ™.
The AL-KO Big Foot™ is also able to be fitted as an aftermarket product to most caravans/trailers on the Australian Market. This unique product provides the corner steady with a flat load bearing surface, ideal for soft ground. No more carrying around pieces of wood to put under the corner steady on soft ground!
| Part No | Description | Surface Finish | Length |
|---|---|---|---|
| 654500 | Hex Drive – Front | Zinc Plated | 500mm |
| 654500G | Hex Drive – Front – bolt on | Galvanised | 500mm |
| 654555G | Hex Drive – Front – side bolt | Galvanised | 500mm |
| 654600 | Hex Drive – Front | Zinc Plated | 600mm |
| 654701 | Hex Drive – Front | Zinc Plated | 700mm |
| 654701G | Hex Drive – Front – bolt on | Galvanised | 700mm |
| Part No | Description | Surface Finish | Length |
|---|---|---|---|
| 655410 | Hex Drive”European Style” 1000kg Galvanised 495mm capacity | Zinc Plated | 500mm |
| 655409 | Support bracket for 655410 European Steady | Galvanised | 500mm |
| Part No | Description | Surface Finish | Length |
|---|---|---|---|
| 654859 | Premium Drop Down with Big Foot? fitted | Zinc Plated | 590mm |
| 654874 | Premium D rop Down with Big Foot? fitted | Zinc Plated | 740mm |
Corner Steady Handles
| Part No | Description | Surface Finish | Length |
|---|---|---|---|
| 654700 | Hex Drive Handle | Zinc plated | 800mm |
| 654702 | Hex Drive Off Road Handle | Zinc plated | 1150mm |
| 654845 | Hex Drive suit Drop Down Steady | Zinc Plated | 450mm |
BIG FOOT™
| Part No | Description |
|---|---|
| 655900 | Big Foot – boxed set |
| 655901 | Big Foot – single foot |
| 655902 | Big Foot – Hardware |
Most AL-KO corner steadies are suitable to be fitted with the AL-KO Big Foot™.
The AL-KO Big Foot™ is also able to be fitted as an aftermarket product to most caravan trailers on the Australian Market. This unique product provides the corner steady with a flat load bearing surface, ideal for soft ground. No more carrying around pieces of wood to put under the corner steady on soft ground!
Big Foot is a registered trademark of AL-KO International.
Big Foot is covered by registered design.
