Actuation Equipment
Hydraulic Disc Brake actuation equipment
The parts listed are an example of the vast AL-KO range of hydraulic components to complement the range of hydraulic drum brakes.
Master Cylinders and Adaptors
| Part No | Description |
|---|---|
| 313001 | Master cylinder 3/4″ |
| 313005 | Master cylinder cap 3/4″ |
| 313003 | Master cylinder adaptor 3/16″ |
| 313007 | Master cylinder 7/8″ suit AL-KO coupling |
| 313008 | Master cylinder cap 7/8″ |
| 313011 | Master cylinder 1″ suit AL-KO coupling |
| 313012 | Master cylinder cap suit 1″ master cylinder |
Hoses
| Part No | Description |
|---|---|
| 313020 | Hose hydraulic male-male fittings 3/8″ UNF |
| 313021 | Hose hydraulic 15 1/4″ 3/8″ UNF male-female fittings |
| 313022 | Hose clip chassis |
Piping tube and nuts
| Part No | Description |
|---|---|
| 313017 | Tubing Bundy 3/16″ x 17″ |
| 313030 | Tube nut long 3/16″ tube |
| 313031 | Tube nut short 3/16″ tube |
| 313032 | Pipe joiner 3/16″ tube |
| 333333 | Three way block 3/8″ UNF |
| 313042 | Tubing Bundy 3/16″ x 42 1/2″ |
| 313054 | Tubing Bundy 3/16″ x 54 1/2″ |
| 313056 | Tubing Bundy 3/16″ x 56 1/2″ |
| 313066 | Tubing Bundy 3/16″ x 66 1/2″ |
| 313068 | Tubing Bundy 3/16″ x 68 1/2″ |
| 313080 | Tubing Bundy 3/16″ x 3.658 metre 3/16 long / 3/16 short tube nut |
Sensabrake – http://www.sensabrake.com/
Sensabrake has been enthusiastically received by the boating industry. All trailers, by law, that weigh 2 tonne or over when loaded must incorporate a power assisted brake application, and a break away system that applies the trailer brakes automatically should the towing vehicle and trailer become separated. Until recently, a vacuum system was the only solution. This is not only expensive but often means the warranty of the tow vehicle is voided. By using the Sensabrake actuator the hydraulic disc brakes are now legal for rigs over 2 tonne and perform exceptionally well.
Sensabrake is made up of a trailer mounted actuator and a sophisticated in-car kit which uses a unique pedal mounted pressure pad to provide proportional trailer braking.
The Sensabrake actuator utilises stored energy (compressed air) and immediate braking is available as soon as the driver applies pressure to the brake pedal. This is a unique feature as other electro-hydraulic systems are activated by pumping the brake to build up pressure causing significant delay in braking in an emergency stopping situation.
When tri-axles with hydraulic brakes or calipers are used then the “big bore” Sensabrake kit should be selected to ensure sufficient fluid displacement is available to efficiently operate the brakes.
Sensabrake is easy to install for a new or an existing trailer and will give boat owners peace of mind when towing.
| Part No | Description |
|---|---|
| 350002 | Sensabrake Actuator only |
| 350003 | Sensabrake Wiring Loom only |
| 350004 | Sensabrake Park Brake Kit |
| 350005 | Sensabrake Manual Brake Pad 45mm x 60mm |
| 350006 | Sensabrake Automatic Brake Pad 45mm x 115mm |
| 360007 | Sensabrake Electronic Control Unit (E.C.U.) |
| 350008 | Sensabrake Mouse |
| 350013 | Sensabrake In-Car Kit complete |
| 350014 | Sensabrake Full Actuator Kit |
| 350015 | Sensabrake 24v to 12v converter |
| 350024 | Sensabrake Big Bore actuator only 25.4mm bore – suit tri-axle |
| 350025 | Sensabrake Big Bore full actuator kit 25.4mm bore – suit tri-axle |
| 360016 | Sensabrake Blanking Plug |
| 350045 | Sensabrake Pressure Bleed Gun |
| 350035 | Sensabrake Manual Brake Pad Suit U.S.A. Vehicles 55mm x 80mm |
| 350036 | Sensabrake Automatic Brake Pad Suit U.S.A.Vehicles 60mm x 140mm |
| 313056 | Tubing Bundy 3/16″ x 56 1/2″ |
