|
Corner Steadies
AL-KO International
manufactures a range of corner steadies that set the standards for
this type of product. Made from quality materials these well designed
corner steadies ensure that the end user is able to stabilize the
caravan or trailer with the minimum of effort.
Note: Corner
steadies are not designed to be used as a jack or as the means of
lifting the trailer or caravan off the ground. They are designed
to stabilize the trailer or caravan when stationary.
AL-KO was the
first company to introduce the hexagon drive on the screw shaft
of the corner steady, providing positive drive. Some innovative
customers use a hexagon socket and an electric screw driver to quickly
and effortlessly raise and lower the steady.
The unique
AL-KO plastic end knob and plastic grip make the use of the winding
handle simple and comfortable.
All AL-KO corner
steadies have been tested and meet the requirements of the Recreational
Vehicle Manufacturers Association of Australia, the Australian controlling
body for caravan manufacturing standards.
Steadies are
available in conventional wind down style and also in “drop
down” style, where the steady can be swung from the horizontal
travelling position to different angles including the optimum position
of vertical. The “drop down” corner steady requires only
a small amount of winding to steady the caravan. The top of the
range corner steady is the German designed 1000 kg heavy duty steady
which is the ultimate in strength and style.
Most AL-KO corner
steadies are suitable to be fitted with the AL-KO Big Foot ™.
The AL-KO Big
Foot™ is also able to be fitted as an aftermarket product to
most caravans/trailers on the Australian Market. This unique product
provides the corner steady with a flat load bearing surface, ideal
for soft ground. No more carrying around pieces of wood to put under
the corner steady on soft ground!
| Part
No |
Description |
Surface
Finish |
Length |
| 654500 |
Hex Drive - Front |
Zinc Plated |
500mm |
| 654500G |
Hex Drive - Front - bolt
on |
Galvanised |
500mm |
| 654555G |
Hex Drive
- Front - side bolt |
Galvanised |
500mm |
| 654600 |
Hex Drive - Front |
Zinc Plated |
600mm |
| 654701 |
Hex Drive
- Front |
Zinc Plated
|
700mm |
| 654701G |
Hex Drive - Front - bolt
on |
Galvanised |
700mm |
|
| Part
No |
Description |
Surface
Finish |
Length |
| 655410 |
Hex Drive"European Style"
1000kg Galvanised 495mm capacity |
Zinc Plated |
500mm |
| 655409 |
Support bracket for 655410
European Steady |
Galvanised |
500mm |
|
| Part
No |
Description |
Surface
Finish |
Length |
| 654859 |
Premium Drop Down with Big Foot™ fitted |
Zinc Plated |
590mm |
| 654874 |
Premium D rop Down with Big Foot™ fitted |
Zinc Plated |
740mm |
|
Corner Steady
Handles
| Part
No |
Description |
Surface
Finish |
Length |
| 654700 |
Hex Drive Handle |
Zinc plated |
800mm |
| 654702 |
Hex Drive Off Road Handle |
Zinc plated |
1150mm |
| 654845
|
Hex Drive
suit Drop Down Steady |
Zinc Plated |
450mm |
|
BIG
FOOT™
| Part
No |
Description |
| 655900 |
Big Foot - boxed set |
| 655901 |
Big Foot - single foot |
| 655902 |
Big Foot
- Hardware |
|
Most AL-KO corner
steadies are suitable to be fitted with the AL-KO Big Foot™.
The AL-KO Big
Foot™ is also able to be fitted as an aftermarket product to
most caravan trailers on the Australian Market. This unique product
provides the corner steady with a flat load bearing surface, ideal
for soft ground. No more carrying around pieces of wood to put under
the corner steady on soft ground!
Big Foot is
a registered trademark of AL-KO International.
Big Foot
is covered by registered design.
|
