AL-KO Australia : Vehicle Technology : Products · Axles · Axle / stub axle machining profiles

Axle / Stub Axle Machining Profiles

Bearing type	Manu-facturer's bearing no. (inner)	(A) "Nominal" inner bearing diam. (mm)	Manu-facturer's bearing no. (outer)	(B) "Nominal" outer bearing diam. (mm)	(C) Thread size & type (inches)	(D) "Nominal" seal journal diam. (mm)	AL-KO seal part no.
LM	LM 67048/10	31.75	LM	19.05	3/4" UNF - 16 TPI	37.5	491015
Slimline	L 68149/10	35.00	LM 12749/10	22.00	3/4" UNF - 16 TPI	43.9	492015
Parallel	L 68149/10	35.00	L 68149/10	35.00	1" UNF - 14 TPI	43.9	492015
1.5 t	LM 29749/10	38.10	LM 67048/10	31.75	1" UNF - 14 TPI	50.9	493015
2 t	HR 30210	50.00	15123 / 15245	31.75	1" UNF - 14 TPI	60.3	494015
3 t	HR 30210	50.00	LM 29749/10	38.10	11/4"	60.3	494015

* Note, The “nominal” sizes shown do not accurately reflect the manufactured size. AL-KO International manufactured all axles to fine diameters not detailed above.



	Independant Rubber Suspension (IRS) axles

	Beam Axle Types

	Bare straight axles

	Bare overlay and drop axles

	Straight unbraked axles

	Overlay unbraked axles

	Drop unbraked axles

	Straight braked axles

	Overlay braked axles

	Drop braked axles

	Total trailer systems (for trailers over 4.5 tonne)

	Stub axles

	Hub & stub sets

	Axle / stuble axles machining profiles