|
Hydraulic
Disc Brake actuation equipment
The parts listed are an example of the vast AL-KO range of hydraulic components to complement the range of hydraulic drum brakes.
Master Cylinders
and Adaptors
| Part
No |
Description |
| 313001 |
Master cylinder 3/4" |
| 313005 |
Master cylinder cap 3/4" |
| 313003 |
Master
cylinder adaptor 3/16" |
| 313007 |
Master cylinder 7/8" suit
AL-KO coupling |
| 313008 |
Master
cylinder cap 7/8" |
| 313011 |
Master cylinder 1" suit AL-KO
coupling |
| 313012 |
Master
cylinder cap suit 1" master cylinder |
|
Hoses
| Part
No |
Description |
| 313020 |
Hose hydraulic
male-male fittings 3/8" UNF |
| 313021 |
Hose hydraulic 15 1/4" 3/8"
UNF male-female fittings |
| 313022 |
Hose clip chassis |
|
Piping tube
and nuts
| Part
No |
Description |
| 313017 |
Tubing Bundy 3/16" x 17" |
| 313030 |
Tube nut long 3/16" tube |
| 313031 |
Tube nut
short 3/16" tube |
| 313032 |
Pipe joiner 3/16" tube |
| 333333 |
Three way
block 3/8" UNF |
| 313042 |
Tubing Bundy 3/16" x 42 1/2" |
| 313054 |
Tubing
Bundy 3/16" x 54 1/2" |
| 313056 |
Tubing Bundy 3/16" x 56 1/2" |
| 313066 |
Tubing
Bundy 3/16" x 66 1/2" |
| 313068 |
Tubing Bundy 3/16" x 68 1/2" |
| 313080 |
Tubing
Bundy 3/16" x 3.658 metre 3/16 long / 3/16 short tube
nut |
|
Sens-A-Brake - http://www.sensabrake.com/
Sens-a-Brake
has been enthusiastically received by the boating industry. All
trailers, by law, that weigh 2 tonne or over when loaded must incorporate
a power assisted brake application, and a break away system that
applies the trailer brakes automatically should the towing vehicle
and trailer become separated. Until recently, a vacuum system was
the only solution. This is not only expensive but often means the
warranty of the tow vehicle is voided. By using the Sens-a-Brake
actuator the hydraulic disc brakes are now legal for rigs over 2
tonne and perform exceptionally well.
Sens-a-Brake
is made up of a trailer mounted actuator and a sophisticated in-car
kit which uses a unique pedal mounted pressure pad to provide proportional
trailer braking.
The Sens-a-Brake
actuator utilises stored energy (compressed air) and immediate braking
is available as soon as the driver applies pressure to the brake
pedal. This is a unique feature as other electro-hydraulic systems
are activated by pumping the brake to build up pressure causing
significant delay in braking in an emergency stopping situation.
When tri-axles
with hydraulic brakes or calipers are used then the “big bore”
Sens-a-Brake kit should be selected to ensure sufficient fluid displacement
is available to efficiently operate the brakes.
Sens-a-Brake
is easy to install for a new or an existing trailer and will give
boat owners peace of mind when towing.
| Part
No |
Description |
| 350002 |
Sens-a-Brake Actuator only |
| 350003 |
Sens-a-Brake Wiring Loom
only |
| 350004 |
Sens-a-Brake
Park Brake
Kit |
| 350005 |
Sens-a-Brake Manual Brake
Pad 45mm x 60mm |
| 350006 |
Sens-a-Brake
Automatic Brake Pad 45mm x 115mm |
| 360007 |
Sens-a-Brake Electronic Control
Unit (E.C.U.) |
| 350008 |
Sens-a-Brake
Mouse |
| 350013 |
Sens-a-Brake In-Car Kit complete |
| 350014 |
Sens-a-Brake
Full Actuator Kit |
| 350015 |
Sens-a-Brake 24v to 12v converter |
| 350024 |
Sens-a-Brake
Big Bore actuator only 25.4mm bore - suit tri-axle |
| 350025 |
Sens-a-Brake Big Bore
full actuator kit 25.4mm bore - suit tri-axle |
| 360016 |
Sens-a-Brake
Blanking Plug |
| 350045 |
Sens-a-Brake Pressure Bleed
Gun |
| 350035 |
Sens-a-Brake
Manual Brake Pad Suit U.S.A.
Vehicles 55mm x 80mm |
| 350036 |
Sens-a-Brake Automatic Brake
Pad Suit U.S.A.Vehicles
60mm x 140mm |
| 313056 |
Tubing
Bundy 3/16" x 56 1/2" |
|
|
