AL-KO Light duty mechanical disc brake calipers are hot dip galvanised. The bushes, springs and bolts etc are made from stainless steel.
AL-KO Heavy duty mechanical disc brake calipers are Dacromet® coated for salt water corrosion resistance. The slide pins are made from stainless steel adding to the excellent capacity of this product to continue to function after exposure to corrosive environments.
The mechanical caliper comes in two configurations, forward pull and centre pull.
Forward pull is used on beam axles whilst centre pull is used when the AL-KO Independent Rubber Suspension (I.R.S.) is used. The simple
cable actuation of these calipers and their uncomplicated design makes servicing a task that can be carried out by the ”handyman”, saving on servicing cost.
AL-KO mechanical calipers are suitable for disc hubs and rotors of thicknesses from 12mm to 15mm.
| Part No. | Description | Method Of Operation | Protective Coating | Recommended Maximum Load on 13”/14” wheels |
Recommended Maximum Load on 15”/16” wheels |
Mounting Details Bolt diameter and spacing |
Maximum Cable Input Load |
|---|---|---|---|---|---|---|---|
|
323300 |
Single caliper |
Forward pull |
Hot dipped galvanised |
775 kg each wheel |
725 kg each wheel |
7/16” UNF H.T x 2 1/4” 88.9mm centres (3.5”) |
200kg |
|
|
Single caliper |
Forward pull |
Hot dipped galvanised |
775 kg each wheel |
725 kg each wheel |
7/16” UNF H.T x 2 1/4” 88.9mm centres (3.5”) |
200kg |
|
323102 |
Pair |
Forward pull |
Hot dipped galvanised |
1550 kg each axle |
1450 kg each axle |
7/16” UNF H.T x 2 1/4” 88.9mm centres (3.5”) |
200kg |
|
323000 |
Single Caliper |
Centre pull |
Hot dipped galvanised |
625 kg each wheel |
600 kg each wheel |
7/16” UNF H.T x 2 1/4” 88.9mm centres (3.5”) |
200kg |
|
323002 |
Pair |
Centre pull |
Hot dipped galvanised |
1250 kg each axle |
1200 kg each axle |
7/16” UNF H.T x 2 1/4” 88.9mm centres (3.5”) |
200kg |
|
323800 |
Single Caliper |
Forward Pull |
Dacromet® |
850 kg each wheel |
1000 kg each wheel |
12mm H.T x 45mm Dacromet® Set screws supplied 88.9mm centres (3.5”) |
300kg |
|
323850 |
Single Caliper |
Centre Pull |
Dacromet® |
850 kg each wheel |
1000 kg each wheel |
12mm H.T x 45mm Dacromet® Set screws supplied 88.9mm centres (3.5”) |
300kg |
