Brake drums are selected or nominated by the drum diameter,
the wheel drilling pattern and in the case of hub drums, the machining profile and appropriate bearings. AL-KO International can provide brake drums drilled to suit the majority of popular wheel drilling patterns ex stock and can manufacture to suit other drilling
patterns on request. The table overleaf lists popular mechanical
brake drums.
|
PART NO HUB DRUM FITTED WITH STUDS ONLy |
DESCRIPTION (BRAKE DIAMETER & LINING WIDTH) |
TYPE OF DRUM |
MAX. AxLE CAPACITy |
BEARINGS CAN BE FITTED TO HUB DRUMS TO SUIT THESE MACHINING PROFILES |
POPULAR WHEEL DRILLING PATTERNS |
|---|---|---|---|---|---|
|
422207 |
9” x 1 3/4” |
Hub drum |
1450 kg |
LM/Slimline |
Ford 5 x 4.5” PCD |
|
422210 |
9” x 1 3/4” |
Hub drum |
1450 kg |
LM/Slimline |
Commodore 5 x 120mm PCD |
|
422208 |
9” x 1 3/4” |
Hub drum |
1450 kg |
LM/Slimline |
HQ Holden 5 x 4.75” PCD |
|
422213 |
4” 3 9” x 1 |
Hub drum |
1200 kg |
Slimline |
6 stud Land Cruiser/Nissan 6 x 140mm PCD |
|
422200 |
9” x 1 3/4” |
Hub drum |
1450 kg |
LM/Slimline |
HT Holden 5 x 4.25” PCD |
|
422212 |
9” x 1 3/4” |
Hub drum |
1200 kg |
Slimline |
5 stud Land Cruiser 5 x 150mm PCD |
|
422216 |
9” x 1 3/4” |
Hub drum |
1200 kg |
Slimline |
Range Rover / Land Rover Defender 5 x 6.5” PCD |
|
422206 |
9” x 1 3/4” |
Hub drum |
1450 kg |
LM/Slimline |
Datsun 4 x 4.5” PCD |
|
415105 |
11” |
Hub + Drum |
2300 kg |
Can be fitted to 1.5t, 2t and 3t hubs |
6 stud Land Cruiser 6 x 140mm PCD |
|
415130 |
11” |
Hub + Drum |
2300 kg |
Can be fitted to 1.5t, 2t and 3t hubs |
Range Rover / Land Rover Defender 5 x 6.5” PCD |
|
415110 |
11” |
Hub + Drum |
2300 kg |
Can be fitted to 1.5t, 2t and 3t hubs |
5 stud Land Cruiser 5 x 150mm PCD |
|
415140 |
11” |
Hub + Drum |
2300 kg |
Can be fitted to 1.5t, 2t and 3t hubs |
Ford F100 5 x 139.7mm |
|
415120 |
11” |
Hub + Drum |
2300 kg |
Can be fitted to 1.5t, 2t and 3t hubs |
Land Rover 5 x 6.5” PCD |
Brake drums are available in many formats, including undrilled, drilled, studded (with studs & nuts) and with full bearing kits.
It is important to select the appropriate brake capacity and to seek advice from AL-KO on the appropriate axle machining profile and bearing
configuration to carry and stop the required load given the wheel size that is to be fitted.
